Blog
    Sourcing and manufacturing10 Nov 20263 min read

    Direct overseas supplier vs. a managed Israeli supplier: what is really in the price

    AL7075 brackets, packed for shipment

    A direct quote from an overseas manufacturer almost always looks cheaper in the table. Sometimes it really is, even after everything. And sometimes the difference disappears exactly in the lines that never appear in the "unit price" column. This article is not an argument against ordering directly. It is an argument for comparing correctly.

    What a direct quote covers

    Machining, standard raw material, basic packaging and sometimes freight to the port. For simple parts, in large quantities, with a clear drawing and no special quality requirements, this can be the right choice. The price is low because competition there is real, and because you take on everything around the part.

    What stays outside

    Certified material. "6061" is not "6061-T651 with an EN 10204 3.1 certificate to the heat number". In a direct order, you are the one who has to demand the certificate, verify it against the actual material, and decide what to do when it does not match.

    Coatings and heat treatment. Anodize to MIL-A-8625 with Type and Class, passivation, electroless nickel, heat treatment to a defined temper. Each one is a sub-supplier of the manufacturer, with a specification that has to be flowed down correctly and a certificate that has to come back.

    Inspection before shipment. The manufacturer's dimensional report is a starting point. Who compares it to the drawing before the batch gets on a plane? In a direct order the answer is: you, after the parts have arrived.

    Landed cost. Freight, insurance, brokerage, duties where they apply. Many direct quotes are EXW or FOB, and 10 to 25 percent can be added before the parts reach your shelf.

    The buyer's time, and what happens when something goes wrong. Four parties on one part, and a deviation or a stuck shipment handled by correspondence across time zones.

    When direct is right

    Simple, well-defined part, large quantity, no traceability requirement, no special coating, an experienced buyer, and an end customer who will not ask for a quality package. Then the price gap is real and worth taking.

    When a managed supplier pays off

    Defense, medical or airborne systems, certified material and traceability, coatings to specification, small to medium quantities of complex parts, no spare buyer to manage four suppliers, and a one-month delay that costs more than the price difference.

    How to compare

    Bring both quotes to the same basis: material standard, temper and certificate; coatings and their certificates; quality package; delivery terms; and who owns a deviation. Add your own cost for every missing line. Only then look at the number.

    At Rapido Production we are not one manufacturer; we choose the right manufacturer for each part and manage the whole chain to your factory, with a landed price and the quality package inside. Send the PDF and STEP through rapido-pro.com/rfq and we will quote in the same format, so the comparison is fair.